CFRT Panels And Core Material

Photovoltaic Backplane

Photovoltaic backplane sheet – made by hot pressing composite of multi-layer glass fiber reinforced PP prepreg tape. In order to improve the appearance quality and certain functional layers, functional materials can be composite on the upper and lower surfaces (such as coating process, adhesive composite process, or hot pressed composite functional film). The unit area mass of continuous fiberglass impregnated reinforced PP unidirectional tape is 245-450g/㎡, with a glass fiber content of 60-70%. The specific structure and unit area mass can be designed according to the requirements of the photovoltaic panel.

inquiry detail
PP Honeycomb Core

Polypropylene (PP) honeycomb core is a lightweight, high-strength material commonly used in composite structures, particularly in sandwich panels. The honeycomb structure consists of a series of hexagonal cells that provide excellent mechanical properties while minimizing weight. This core material is made from polypropylene, a thermoplastic polymer known for its durability, chemical resistance, and recyclability.

inquiry detail
CFRT Sandwich Foam Panel

CFRT (Continuous Fiber Reinforced Thermoplastic) sandwich foam panels are an innovative composite material designed to offer enhanced performance in various applications, including construction, automotive, aerospace, and marine industries. These panels consist of a lightweight foam core sandwiched between two layers of continuous fiber-reinforced thermoplastic materials, providing a unique combination of strength, durability, and thermal insulation.

inquiry detail
CFRT Honeycomb Panel

The CFRT series honeycomb panel is a new type of thermoplastic surface layer composed of high-performance CFRT strips. The core layer is made of honeycomb material with low bulk density and high strength, and adopts environmentally friendly thermal composite technology.

inquiry detail
CFRT Sandwich Panel

Continuous Fiber Reinforced Thermoplastic (CFRT) sandwich panels are advanced composite materials designed to provide high strength, low weight, and excellent thermal and mechanical properties. These panels consist of three main components: two outer layers (face sheets) made of continuous fiber reinforced thermoplastic composites and a core material that is typically lightweight and provides structural support.

inquiry detail
CFRT Sheet

CFRT sheets (continuous fiber reinforced thermoplastic composite sheets), which is a multi- layer laminated sheets with thermoplastic unidirectional tapes laid at different angles (0°/90°, 45°/45°).This lamination method can compensates for the tensile strength of a single layer of unidirectional tape in the other direction.Continuous fibers give them strong mechanical properties and replace metal materials in many fields. This new type of glass fiber reinforced sheet can also replace traditional thermosetting FRP sheets. Because of its wide range of uses, stable performance, and high cost performance, CFRT sheets have become the first choice for many industries pursuing lightweight.

inquiry detail
CFRT Ud-Tape

CFRT Ud-tape is a single-layer fiber reinforced thermoplastic CFRT prepreg tape after continuous fiber spreading out in parallel, impregnated with thermoplastic resin and reshaped. Through the company’s proprietary technology research and development, coupling treatment on the surface of glass fiber overcomes the technical difficulties such as high viscosity of thermoplastic resin and not easy to infiltrate the fiber gap. The unidirectional tape is made by impregnating glass fiber with resin with unique technology. It is characterized by horizontal arrangement of fibers, glass fiber content of 50%-70%, thickness of 0.15-0.4mm and the tensile strength is greater than 800MPa, even up to 1000MPa.

inquiry detail

E-mail

E-mail

jupiter9902@jiudinggroup.com
Phone

Tel

+86 13584676984
Top